Flow Control Technologies

9 - 10 December 2013

UK Aerodynamics Centre

Martell House, Cranfield, UK

Course Coordinator: Prof. Kwing-So Choi, Nottingham University, UK


Courtesy: Johan Kok

ERCOFTAC is proud to announce a two day course on Flow Control Technologies, at UK Aerodynamics Centre in Cranfield, UK, 9-10 Dec 2013.

Flow Control is a topic that has seen tremendous technological advances, from basic measurements techniques relying on pressure sensors, to a myriad of sensing techniques underpinned by advances in material technology, viable and accurate aerodynamic analysis, which are all made tractable by the rapid advances in digital control technologies. The recent advances in sensing and control technologies will be presented, over the two days of this course, with the aim of providing a key picture of the aerodynamic flow processes governing a particular flow regime, and thus express a suite of aerodynamic-body structure motive forces that can help monitor and control the flow regime in question, with a view to improved aerodynamic load transfer and thus efficiency.


Scope:

- Overview of the modern flow control techniques applicable to aeronautics

- Basic theory and applications of flow control from laminar to turbulence flows

- Review of current application of various techniques in controlling momentum, flow noise and heat transfer

- Discussion on the technology transfer issues and future progress


Lecturers:

Prof. Kwing-So Choi, University of Nottingham, UK

Prof. Rudibert King, TU Berlin, Germany

Prof. Jens Fransson, KTH

Prof. Richard Sandberg, University of Southampton, UK

Prof. Ken Badcock, University of Liverpool, UK

Prof. Jonathan Morrison, Imperial College, UK

Prof. Eric Moreau, University of Poitiers, France

Prof. Michael Leschziner, Imperial College, UK

Prof. Maurizio Quadrio, Politecnico di Milano, Italy


Programme:

flow_control_course.pdf

Travel:

directions_to_uk_aerodynamics_centre.pdf


Course Fees:

ERCOFTAC members: €540

ERCOFTAC non-members: €875

Please note the course fee covers attendance, course material, lunch and refreshments and does not include accommodation


For registration of interest:

admin@cado-ercoftac.org

Related Events

Advanced Course on Modern Methodologies in Fluid Mechanics

Advanced Course on Modern Methodologies in Fluid Mechanics 11th - 16th April 2027 Sardinia, Italy ​ Location Dimora Sella ( https://www.dimorasella.com ), Strada Vicinale Valverde 63 07041 - Alghero (SS), Italy - Sardinia About the course The course addresses the increasing need for

11 April 2027

European Drag Reduction and Flow Control Meeting 2026 – EDRFCM2026

S​IG20 Meeting ERCOFTAC Drag Reduction and Flow Control special interest group ( SIG20 ) is pleased to announce the next European Drag Reduction and Flow Control Meeting (EDRFCM2026) which will take place at Universidad Carlos III Madrid, Spain. Subjects: Theoretical, numerical and

8 September 2026

European Drag Reduction and Flow Control Meeting 2024 – EDRFCM2024

E​uropean Drag Reduction a​nd Flow Control Meeting (EDRFCM) 2024 10 th - 13 th September 2024 Castello del Valentino Turin ( Torino) , Italy ERCOFTAC Drag Reduction and Flow Control special interest group (SIG 20) is pleased to announce the next European Drag Reduction and Flow

10 September 2024

European Drag Reduction and Flow Control Meeting – EDRFCM2022

Joint ERCOFTAC/EU-CTFF European Drag Reduction and Flow Control Meeting – EDRFCM 2022 6th - 9th September 2022 ​ Conservatoire National des Arts et Métiers, Paris, France ERCOFTAC Special Interest Group (SIG 20) Drag Reduction and Flow Control and EU H2020 MSCA-RISE Control of

6 September 2022

European Drag Reduction and Flow Control Meeting

European Drag Reduction and Flow Control Meeting 26-29 March 2019, Haus der Kirche, Bad Herrenalb, GERMANY ERCOFTAC Special Interest Group (SIG20) - Drag Reduction and Flow Control and the Institute of Fluid Mechanics (ISTM) of Karlsruhe Institute of Technology (KIT) are pleased to

29 March 2019

Related News

European Drag Reduction and Flow Control Meeting – EDRFCM 2026

S​IG20 Workshop European Drag Reduction and Flow Control Meeting (EDRFCM2026) was held on 8th - 11th September 2026 at the Universidad Carlos III Madrid in Spain. The workshop was organised by the Drag Reduction and Flow Control Special Interest Group (SIG 20) of ERCOFTAC. This was the 40

27 October 2026

European Drag Reduction and Flow Control Meeting – EDRFCM 2024

EDRFCM 2024 took place between 10th and 13th September 2024 at the Castello del Valentino Turin (Torino), Italy P​articipants of the workshop enjoyed lectures and face to face discussions R​ead more T​he scientific report and summary will be available soon in

17 September 2024

Joint ERCOFTAC/EU-CTFF European Drag Reduction and Flow Control Meeting – EDRFCM 2022

EDRFCM 2022 took place between 6th and 9th September 2022 at Conservatoire National des Arts et Métiers, Paris, France T​he scientific report and summary will be available soon. P​articipants of the workshop enjoyed lectures and face to face discussions

21 September 2022

European Drag Reduction and Flow Control Meeting – EDRFCM 2022 Postponed to 6th - 9th September 2022

Joint ERCOFTAC/EU-CTFF European Drag Reduction and Flow Control Meeting – EDRFCM 2022 has been postponed to 6th - 9th September 2022 Location: Conservatoire National des Arts et Métiers, Paris, France Read more

4 January 2022

Bulletin 119

The new issue of ERCOFTAC Bulletin has been released ! Table of contents is available here

1 August 2019

Register your interest in this SIG

More SIGs

This site uses cookies that enable us to make improvements, provide relevant content, and for analytics purposes. For more details, see our Cookie Policy. By clicking Accept, you consent to our use of cookies.